Epson SC-F9200 series User Manual

B
Use the d/u buttons to choose a value.
C
After finishing the configuration, press the Z
button.
D
Press the y button to return to the customize
settings menu.
Head Movement
Choose the range in which the print head moves during
printing.
A
Use the d/u buttons to select Head Movement
and press the Z button.
B
Use the d/u buttons to select the desired setting
and press the Z button.
For faster printing, select Data Width.
For even, high-quality printing, select Printer
Full Width.
C
Press the y button to return to the customize
settings menu.
Multi-Strike Printing
Choose the number of times each line is printed.
A
Use the d/u buttons to select Multi-Strike
Printing and press the Z button.
B
Use the d/u buttons to choose a value.
C
After finishing the configuration, press the Z
button.
D
Press the y button to return to the customize
settings menu.
Roll Type
Choose Printable Side Out or Printable Side In
according to how the media is rolled.
A
Use the d/u buttons to select Roll Type and
press the Z button.
B
Use the d/u buttons to select the desired setting
and press the Z button.
C
After finishing the configuration, press the Z
button.
D
Press the y button to return to the customize
settings menu.
Tension Measurement
The tension is measured and adjusted automatically to
maintain the correct tension for the media being
printed. Periodically is recommended in most
circumstances.
A
Use the d/u buttons to select Tension
Measurement and press the Z button.
B
Use the d/u buttons to select the desired setting
and press the Z button.
C
After finishing the configuration, press the Z
button.
D
Press the y button to return to the customize
settings menu.
Feeding Tension
Feeding Tension has 2 settings: Auto and Manual. The
default setting of Auto is recommended in most
situations. We recommend setting Manual in the
following situations, and then changing the setting
value.
When the media creases while printing
Set to higher than Lv32.
When banding (horizontal banding, tint
unevenness, or stripes) appears at irregular intervals
in printing results.
Set to lower than Lv32.
When the Media Size Check is set to Off
Set the Feeding Tension value as shown in the following
table depending on the media width you loaded.
Media width Feeding Tension value
64 in Lv32
52 in Lv26
44 in Lv22
42 in Lv21
SC-F9200 Series User's Guide
Basic Operations
46

Epson SC-F9200 series Specifications

General

Brand	Epson
Model	SC-F9200 series
Category	Printer
Language	English