K
Fill the ink tank with the ink from the ink pack.
Insert the spout of the ink pack into the ink tank
ink inlet groove and slowly tilt to pour out the
ink.
c
Important:
Get all the ink out of the ink pack so that there
is none remaining.
Do not use the ink in an ink pack to refill
multiple different ink tanks.
This can cause messages from the remaining
ink warning system to not be displayed
properly.
L
Put the ink inlet cap back on the ink tank.
The method for attaching the ink inlet cap differs
depending on the type of ink being refilled.
Except for High Density Black ink
For High Density Black ink
c
Important:
Press the ink inlet cap down firmly so that it
does not detach. If the slider comes into contact
with the ink inlet cap when pulling it out, the
cap could be damaged.
SC-F9200 Series User's Guide
Maintenance
73
To Next Page
Loading...
Need help?
General