Epson SC-F9200 series User Manual

Item Parameter Explanation
Side Margin(Right) 3 to 25mm (0.12 to
1.00inch)
Choose the width of the right margin when media is loaded in the printer.
See the following for more information.
U “Printable area” on page 53
Side Margin(Left) 3 to 25mm (0.12 to
1.00inch)
Choose the width of the left margin when media is loaded in the printer.
See the following for more information.
U “Printable area” on page 53
Print Start Position 0 to 800 mm (0.00
to 32.00 inch)
Adjust this parameter if you want to print from the near center of the
media or if you want to shift the printed area left from the Side
Margin(Right) setting. The area between the right edge of the media and
Print Start Position is left blank. If a value is selected for Side
Margin(Right), an additional area corresponding to the width selected
for Side Margin(Right) will be left blank. See the following for more
information.
U “Printable area” on page 53
Margin Between Pages Allows you to enter a margin between pages. Even after making
adjustments, the size of the margin may change depending on the media
and usage environment.
The margin increases when the number is moved in the + direction, and
decreases when the number is moved in the - direction.
U “Printable area” on page 53
Normal -
No Margin -10 mm to +10 mm
Media Size Check
On
Choose whether the printer automatically detects (On), or does not
automatically detect (Off),the size of the media when the media is loaded.
We generally recommend to operate with this setting set to On.
Try Off if the printer displays a Media Size Error when the media is
correctly loaded. Note, however, that the printer may print beyond the
edges of the media when Off is selected. Ink used outside the edges of the
media will stain the inside of the printer.
Changed settings are reflected when the media is re-loaded.
Off
Media End Check
On
Choose whether the printer automatically detects (On) or does not
automatically detect (Off), the end of the media. Try Off if the printer
displays Media Out when the media is correctly loaded. We generally
recommend to operate with this setting set to On.
Off
Media Skew Check
On When skewed media is detected, the printer will either stop printing and
display an error (On) or continue printing (Off). On is recommended in
most circumstances, as skewed media may cause the printer to jam.
Off
Media End Option Continue
Select whether or not (Continue/Stop Printing) to print the remaining
data after replacement.
Stop Printing
Print Nozzle Pattern
Off Select the frequency with which the printer prints a nozzle test pattern:
never (Off) or once every 1 to 10 pages. Periodic test patterns will not be
printed while Off is selected. To print a test pattern at the top of every 1 to
10 pages, select an option between 1 and 10. When printing is complete,
you can visually inspect the pattern to determine whether there may be
faint or missing colors in the preceding or following printout.
1 to 10 pages
Periodical Cleaning
SC-F9200 Series User's Guide
Using the Control Panel Menu
97

Epson SC-F9200 series Specifications

General

Brand	Epson
Model	SC-F9200 series
Category	Printer
Language	English