Item Parameter Explanation
Sleep Mode 15 to 240 minutes
(15
*
)
The printer enters sleep mode when no errors are detected and no print
jobs have been received for a specific time. In sleep mode, all heaters
turn off, the control panel turns off, and the internal motors and other
components consume less power.
To reactivate the control panel display, press any button in the control
panel except P. The control panel display will however turn off again if
no operations are performed for another 30 seconds under these
conditions. The printer and heaters are only fully reactivated when a
print job is received, the media loading lever is used, or another
operation involving printer hardware is performed.
To return from sleep mode and begin prehearing the heater
immediately, press the
button, and perform Start Preheat.
Charge Settings
SC-F9300 Series User's Guide
Using the Control Panel Menu
102
To Next Page
Loading...
Need help?
General