Epson SC-F9300 series

Specifications Table
Printer Specifications
Printing method On-demand ink jet
Nozzle configuration 360 nozzles x 2 x 2 rows x 4
colors (High Density Black,
Cyan, Magenta, Yellow)
Resolution (maximum) 720 × 1440 dpi
Control code ESC/P raster (undisclosed
command)
Media Feed Method Friction feed
Built-in memory 512 MB for Main
128 MB for Network
Interface Hi-Speed USB-Compatible
with the USB 2.0 Specification.
100Base-TX/1000Base-T
*1
(10Base-T is not supported)
Rated voltage
(#1, #2)
AC 100 to 120V
AC 200 to 240V
Rated frequency (#1
and #2)
50/60 Hz
Rated current (#1, #2) 10A (100 to 120V AC)
5A (200 to 240V AC)
Power consumption
(total for numbers #1
and #2)
Printing: Approx. 570 W
Ready mode: Approx. 340 W
Sleep mode: Approx. 14 W
Power off: Approx. 1.0 W
Temperature and humidity (without condensation)
When printing 15 to 25 °C, 40 to 60%
Media loading or
maintenance, etc.
15 to 35 °C, 20 to 80%
In storage
(Before unpacking)
-20 to 60 °C, 5 to 85%
(Within 120 hours at 60 °C,
within a month at 40 °C)
In storage
(Before charging
ink)
-20 to 40 °C, 5 to 85%
(Within a month at 40 °C)
Printer Specifications
Temperature and humidity range
Gray area: When loading media or maintenance, etc.
Cross-hatch lines: When printing
Dimension When stored: 2620 (W) x 934
(D) x 1332 (H) mm
When at maximum size: 2620
(W) × 1109 (D) × 1670 (H) mm
Weight
*2
Approx. 290 kg
* 1. Use a shielded twisted pair cable (category 5e or better).
* 2. Ink not included.
c
Important:
Use this printer at altitudes below 2000 m.
Warning:
This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
SC-F9300 Series User's Guide
Appendix
132