Epson SC-T5430M User Manual

Settings item Settings value
Advanced
Device Name Display settings change screen
TCP/IP
Proxy Server
Email Server
*
Display General Settings - Scan Settings - Email Server
Shared Folder
*
Display settings change screen
IPv6 Address Enable, Disable
Link Speed & Duplex Auto, 10BASE-T Half Duplex, 10BASE-T Full Duplex, 100BASE-TX Half
Duplex, 100BASE-TX Full Duplex
Redirect HTTP to HTTPS Enable, Disable
Disable IPsec/IP Filtering Proceed
(Displayed when enabled.)
Disable IEEE802.1X
iBeacon Transmission
*
Enable, Disable
Scan Settings
*
(Details of Each Item U “General Settings - Scan Settings (SC-T5400M Series Only)” on page 159)
Confirm Recipient On, Off
Email Server
Server Settings Off, POP before SMTP, SMTP-AUTH
Connection Check Start a test
Scan Options
Confirm Before Ejecting Scanned Document On, Off
Correct Skewed Image On, Off
Document Feed Adjustment -1.00 to 1.00
Image Stitching Adjustment -5 to 5
System Administration (Details of each item U “General Settings - System Administration” on page 161)
Contacts Manager
*
Register/Delete Display the Register/Delete screen for Contacts
Frequent
Email Display the screen for registering frequently used addresses
Network Folder/FTP Display the screen for registering frequently used addresses
Print Contacts
List of all Contacts Specify the print area, and then print
List of Email Contacts Specify the print area, and then print
List of Folder/FTP Contacts Specify the print area, and then print
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Using the Menu
123

Epson SC-T5430M Specifications

General

Brand	Epson
Model	SC-T5430M
Category	Printer
Language	English