c
Important:
❏ Printing is distorted when the trailing edge of
the roll paper comes off the core. Make sure the
trailing edge does not come inside the printing
area.
❏ If the print range settings width
is smaller
than the print data width
, then the sections
beyond the printable width
will not be
printed.
Cut Sheet
When printing borderless at the left and right, the left
and right margins will be 0 mm.
The gray area in the illustration below shows the
printable area. The arrow in the illustration indicates the
direction that the paper is ejected.
*1 SC-T5400 Series/SC-T5400M Series
*2 SC-T3400 Series/SC-T3400N Series
*3 SC-T5400 Series/SC-T3400 Series/SC-T3400N
Series. The top and bottom margins vary
depending on the print quality setting (Speed,
Fine, etc.).
*4 SC-T5400M Series. The top and bottom margins
vary depending on the print quality setting (Speed,
Fine, etc.).
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Appendix
228
To Next Page
Loading...
