Loading and Removing
Cut Sheet(1 sheet)
Loading Cut Sheet(1 sheet)
When roll paper is loaded, remove it.
U “Removing Roll Paper” on page 40
Note:
You can load the paper while viewing the loading
procedure on the screen. To view the procedure on the
screen, touch Paper Setting - Cut Sheet(1 sheet) from the
Home screen.
A
Check that "Load paper." is displayed on the
Home screen and then open the cut sheet cover.
B
Load a sheet of paper with the print side facing
up, align its right edge with the guide on the right,
and move it downwards.
c
Important:
Insert all paper in portrait orientation.
Inserting paper in landscape orientation may
cause a decline in print quality.
C
Insert the leading edge of the paper straight into
the paper slot until you hear a beep.
c
Important:
Insert the paper straight into the paper slot.
Inserting it skewed will cause a skew error or
paper jam.
A dialog box to confirm that the paper is not
skewed appears.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Loading and Setting the Paper
42
To Next Page
Loading...
