Epson SD-10 - Battery Specifications; Environmental Specifications; Supported Operating Systems

Battery Specifications
Type Li-ion
Rated voltage 3.6 V
Current capacity 1,860 mAh
Charging time (while the device is off)
*1
USB port (5 V/0.5 A): Approx. 5 hours (when connected to a computer)
USB port (5 V/0.8 A): Approx. 3 hours (when connected to a USB AC
adapter)
*1: For a new battery
Note:
The following USB AC adapter was used to evaluate this device.
Apple A1385 (rated input: AC 100-240 V / 50-60 Hz / 0.15 A; rated output: DC 5 V 1 A)
Environmental Specifications
Temperature In use Spot color measurement: 0 to 40˚C (32 to 104˚F)
Scan color measurement: 0 to 35 ˚C (32 to 95˚F)
In storage
Before unpacking: –20 to 60˚C (-4 to 140˚F)
*1
After unpacking: –20 to 40 ˚C (-4 to 104˚F)
*2
Battery charging: 10 to 35˚C (50 to 95˚F)
Humidity In use 5 to 85% (without condensation)
In storage 5 to 85% (without condensation)
Pollution Degree PD 2
IP Protection Class IPX0
*1 Can be stored for one month at 40˚C (104˚F), or for 120 hours at 60˚C (140˚F)
*2 Can be stored for one month at 40˚C (104˚F)
Supported Operating Systems
❏ Windows
Windows 7 (SP1, 64-bit), Windows 8/8.1 (64-bit), Windows 10 or later (64-bit)
(Bluetooth LE connection is for Windows 10 (Build 1809) or later)
❏ Mac OS
OS X 10.9 Mavericks or later, macOS 10.12 Sierra or later
(Bluetooth LE connection is for macOS 10.13 High Sierra or later)
❏ Android
Android 5.0 or later
SD-10 User's Guide
Specifications
46