Epson SpectroProofer Mounter 24 - System Requirements; Specifications

SpectroProofer Mounter 24"/44" User’s Guide
Appendix
22
System Requirements
Refer to the ReadMe.txt of your software for the
minimum and recommended computer system
requirements necessary to use this product.
Specifications
c
Caution:
To use this product, you need to install the
printer driver and SpectroProofer Utilities on
your computer.
Specifications
Temperature Operation: 10 to 35°C (50 to
95°F)
Storage (packed): -20 to 60°C
(-4 to 140°F)
(Less than 120 hours at 60°C
[140°F]. Less than 1 month at
40°C [104°F])
Storage (unpacked): -20 to
40°C (-4 to 104°F)
(Less than 1 month at 40°C
[104°F])
Humidity Operation: 30 to 80% (without
condensation)
Storage (packed): 5 to 85%
(without condensation)
Storage (unpacked): 5 to 85%
(without condensation)
Quality
Guarantee
Temperature: 20 to 26°C (68 to
78.8°F)
Humidity: 35 to 65%
Weight For SpectroProofer Mounter 44":
Approx. 13.5 Kg (without
accessories and
ILS20EP/ILS20EPUV)
For SpectroProofer Mounter 24":
Approx. 9.0 Kg (without
accessories and
ILS20EP/ILS20EPUV)
Dimensions For SpectroProofer Mounter 44":
1295(W) × 199(D) × 267(H) mm
For SpectroProofer Mounter 24":
787(W) × 199(D) × 267(H) mm
ILS20EP/ILS20EPUV specifications
Product model X-Rite ILS20EP, ILS20EPUV
Measurement
geometry
condition
0°/ 45° ANSI / ISO 5.4
Measurement
aperture
3.55 mm diameter
Source of light Tungsten lamp 2850°K
Spectrum Measurement: 16 points
Output: 31 points
Angle of field 2°/ 10°
Source of light
type
A, C, D50, D55, D65, D75, F2,
F7, F11, F12
Spectrum
wavelength
area
400-700nm
Measurement
range
0-150% R (reflection)
Repetition
precision
Max 0.2 dE cmc / White tile
Max 0.8 dE cmc / Black tile
Instrument error Ave 0.5 dE cmc / 12BCRA tile
ILS20EP Standard
Ave 1.0 dE cmc /12BCRA tile
ILS20EP Standard
Recommended
recertification
frequency
Once a year