Loading Paper 5
4. Insert the paper, printable side up, against the right edge guide. Always load it
short edge first, even for landscape printing.
You can load up to 100 sheets of plain paper and up to 20 sheets of photo
paper. (See the Reference Guide for capacity guidelines on other media types.)
Note:
The type of paper you choose affects the way your printout looks, so be sure to
select the correct media for your job. If you are just making a copy or printing a
rough draft of an image, plain paper is fine. However, for the best results, you’ll
want to use one of Epson’s special ink jet papers designed for your printer. For
example, your photos will look great printed on Epson DURABrite
®
Ink Glossy
Photo Paper. See page 25 for more information.
5. Slide the left edge guide against the left edge of the paper (but not too tightly).
6. Flip the feeder guard back. Also make sure the paper thickness lever is set
down to the
m position.
The printable side is often whiter
or brighter than the other side.
4 x 6-inch
(10 × 15) photo
paper
The letter L appears briefly in the Copy window on the
control panel when you move the lever to the
m position;
the letter H appears when you move it to the
^ position.
4049978_b0_00.book Page 5 Thursday, July 22, 2004 3:47 PM
To Next Page
Loading...
Need help?
General