4 Loading Paper
Loading Paper
Follow the steps here to load paper in your
Epson Stylus CX.
1. Open the paper support and output
tray, then slide out the extensions.
2. Flip the feeder guard forward. Then slide the left edge guide to the left.
3. Insert the paper, printable side up, against the right edge guide. Always load it
short edge first, even for landscape printing.
Paper
support
Output
tray
Place paper beneath the tabs.
The paper’s printable side is often whiter or brighter than the other side.
4 × 6 (101 × 152 mm),
5 × 7 (127 × 179 mm)
paper
Letter-size
paper
To Next Page
Loading...
