Inserting the Card
13
Inserting the Card
1. Make sure your Epson printer is turned on.
2. Insert your card as shown.
Note:
Do not force the card into the slot; it won’t go in all the way.
The memory card access light flashes, then stays lit. Now you can:
■ View your photos on the LCD display screen and print them (see page 14)
■ Print an index sheet so you can select which photos to print (see page 15)
When you want to remove the card, make sure the memory card access light is not
flashing, then pull the card straight out of its slot. If your printer is connected to
your computer, first prepare the card for removal:
■ If the computer is running Windows, click the or icon on the taskbar
and select
Safely remove USB Mass Storage Device
. Once you see a
confirmation message, remove the card.
■ If your printer is connected to a Macintosh, drag the removable disk icon
from your desktop into the trash, then remove the card.
Caution:
Do not remove the card or turn off your printer while the memory card access light is
flashing; you may lose data on the card.
Memory card
access light
To Next Page
Loading...
Need help?
General
