Epson Stylus NX330 User Manual

Print head needs cleaning
• If there are no gaps, click Finish.
• If there are gaps or the pattern is faint, click Clean to clean the print head again.
If you don’t see any improvement after cleaning the print head up to 4 times, turn off the product and wait
at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink
cartridges may be old or damaged and needs to be replaced.
Parent topic: Print Head Cleaning
Related topics
Replacing Ink Cartridges
Print Head Alignment
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Note: Banding may also occur if your print head nozzles need cleaning.
Aligning the Print Head Using the Product Control Panel
Aligning the Print Head Using a Computer Utility
Parent topic: Adjusting Print Quality
Related concepts
Print Head Cleaning
159

Epson Stylus NX330 Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Optical Scan Resolution	1200 x 2400 dpi
Connectivity	USB, Wi-Fi
Duplex Printing	Manual
Functions	Print, Scan, Copy
Media Types	Plain paper, Photo paper, Envelopes
Print Speed (Black)	6.2 ppm
Print Speed (Color)	3.2 ppm
Paper Sizes Supported	4" x 6", 5" x 7"
Weight	12.1 lbs