77
English
c
Caution:
❏ Do not apply grease to the metal parts under the print head
carriage.
❏ Never use alcohol or thinner to clean the printer, as these
chemicals can damage the components as well as the case.
❏ Be careful not to get water on the printer mechanism or
electronic components.
❏ Do not use a hard or abrasive brush.
❏ Do not spray the inside of the printer with lubricants.
Unsuitable oils can damage the mechanism. Contact your
dealer or a qualified service person if lubrication is needed.
Transporting the Printer
If you need to transport your printer, carefully prepare and repack
it as described below using the original box (or a similar box that
the printer fits snugly into) and packing materials. Follow the
steps below.
c
Caution:
❏ When storing or transporting the printer, do not tilt it, stand
it up vertically, or turn it upside down. Otherwise, ink may
leak from the cartridge.
❏ Leave the ink cartridges installed. Removing the cartridges
can dehydrate the printer head and may prevent the printer
from printing.
1. Plug in the printer, then turn on the printer. Wait until the
print head returns to the home position, then close the printer
cover. Turn off the printer, and then unplug the printer.
2. Disconnect the interface cable from the printer.
To Next Page
Loading...
