Epson Stylus Pro 3800 - Basic Menu Setting Procedure

The Control Panel 102
EPSON Stylus Pro 3800 User’s Guide
Basic Menu setting procedure
This section describes how to enter Menu mode and make settings with the buttons on the
control panel.
Note:
❏ Press the Cancel/Reset + button whenever you want to exit Menu mode and return to the
READY status.
❏ Press the Back/Left l button to return to the previous step.
1. Enter Menu mode
Make sure that READY appears on the LCD panel, and then press the Menu/Right r
button. The first menu appears on the LCD panel.
2. Select a menu
Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a desired
menu.
3. Set the menu
Press the Menu/Right r button to set the selected menu. The first item appears on the
LCD panel.
“NETWORK SETUP” on
page 108
“NETWORK SETUP” on
page 108
DISABLE, ENABLE
“IP ADDRESS SETTING”
on page 108
AUTO, PANEL, PING
“IP, SM, DG SETTING”
on page 108
IP ADDRESS
000.000.000.000 - 192.168.192.168 -
255.255.255.255
SUBNET MASK
000.000.000.000 - 255.255.255.000 -
255.255.255.255
DEFAULT GATEWAY
000.000.000.000 - 255.255.255.255
“APPLE TALK” on page
109
ON, OFF
“MS NETWORK” on
page 109
ON, OFF
“BONJOUR” on page
109
ON, OFF
“INIT NETWORK
SETTING” on page 109
EXECUTE