Epson Stylus Pro 3800 - Maintenance Mode List; Details of Maintenance Mode Items

The Control Panel 117
EPSON Stylus Pro 3800 User’s Guide
4. Select a parameter
Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a parameter
for the item.
5. Set the parameter
Press the Enter button to store the selected parameter.
If the parameter is for execution only, press the Enter button to execute the function
for the item.
Note:
If second parameter is displayed on the LCD panel, repeat the steps 4 and 5 to select and set
the second parameter.
6. Exit Maintenance mode
Press the Power P button to turn off the printer, and turn it on again.
Maintenance mode list
Details of Maintenance mode items
LANGUAGE
You can select the language to be displayed on the LCD panel.
To select a suitable language, follow the steps below.
1. In Maintenance mode, press the Paper Feed/Down d or Ink Cover Open/Up u button
to display LANGUAGE, and press the Menu/Right r button.
2. Press the Paper Feed/Down d or Ink Cover Open/Up u to select a suitable language.
3. Press the Enter button to set the language. Confirm that the READY (or similar word
in the language selected) appears on the LCD panel.
Note:
It takes a while until READY (or similar word in the language selected) appears.
Item First parameters Second parameters
“LANGUAGE” on page 117 ENGLISH, FRENCH, ITALIAN,
GERMAN, SPANISH,
PORTUGUE, DUTCH
-
“UNIT” on page 118 METRIC, FEET/INCH -
“DEFAULT PANEL” on page
118
EXECUTE -