Epson Stylus Pro 3800 - Page 118

The Control Panel 118
EPSON Stylus Pro 3800 User’s Guide
UNIT
You can select a unit of measurement to use to display length. To select a unit, follow the
steps below.
1. In Maintenance mode, press the Paper Feed/Down d or Ink Cover Open/Up u button
to display UNIT, and press the Menu/Right r button.
2. Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a suitable
unit.
3. Press the Enter button to set the unit.
DEFAULT PANEL
You can set all setting values you made in Menu mode to their factory set value.