Maintenance and Transportation 143
EPSON Stylus Pro 3800 User’s Guide
3. Open the top cover and then use a soft, clean cloth to carefully remove any dust or dirt
inside the printer. If the back of a printout is soiled, carefully clean the rib (the light
magenta part) using a soft, clean cloth by following the directions of the arrows.
4. If the problem still occurs, clean it using a soft, clean cloth dampened with mild
detergent. Then, wipe the inside of the printer dry with a dry, soft cloth.
5. If the outer case is dirty, clean it using a soft, clean cloth dampened with mild detergent.
You should keep the ink compartment covers closed to prevent water from getting
inside.
To Next Page
Loading...
