EasyManua.ls Logo

Epson Stylus Pro 4400 - Making the Paper Source Setting; Making the Borderless Setting

Epson Stylus Pro 4400
396 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Printing with Mac OS 9.x 139
2
2
2
2
2
2
2
2
2
2
2
2
English
Making the Paper Source setting
You can select Paper Tray, Roll Paper, Roll Paper (Banner), or
Manual Feed from the Paper Source pull-down menu. Select one
that matches the paper loaded in the printer.
Making the Borderless setting
You can print your data without margins on paper.
For this printing mode, Epson recommends the following media
conditions.
Accommodate media width:
Note:
You cannot perform borderless printing on cut-sheet media with a
width of 420 mm (A2).
When printing on roll paper with a width of 8 inches (203.2 inch)
or 420 mm (A2), attach the spacer to the spindle. See “Attaching
the spacer to the spindle” on page 267.
8 inch, 203.2 mm
210 mm (A4)
Letter (8.5 in), 215.9 mm
10 inch, 254 mm
257 mm
297 mm (A3)
300 mm
12 inch, 304.8 mm
329 mm (Super A3/B)
13 inch, 330.2 mm
14 inch, 355.6 mm
400 mm
16 inch, 406.4 mm
420 mm (A2)
17 inch, 431.8 mm

Table of Contents

Other manuals for Epson Stylus Pro 4400

Related product manuals