Epson Stylus Pro 4400 - Using EPSON Monitor IV; Accessing EPSON Monitor IV

170 Printing with Mac OS 9.x
Using EPSON Monitor IV
After you send a print job to the printer, you can use the EPSON
Monitor IV utility to check, cancel, or change the priority of print
job that are queued for printing. This utility also shows the status
of the job currently being printed.
Accessing EPSON Monitor IV
To access EPSON Monitor IV, follow the steps below.
Data will be sent to the
printer after being stored
on your disk.
Select this check box to prevent horizontal
banding in your printout. By default,
graphics data is sent by the computer to the
printer in rectangular bands, which
prevents the printer from having to
reconstruct an entire data in memory
before printing it. Selecting this check box
will make the computer temporarily store
the data on its hard drive and then send it
to the printer as a whole to prevent banding
in the printed image.
Check for errors before
starting to print.
Select this check box if you want to check
for errors before starting to print.
Check the ink level
before starting to print.
Select this check box if you want to check
the ink level before starting to print.