Maintenance and Transportation 317
7
7
7
7
7
7
7
7
7
7
7
7
English
5. Push the green tab on the left side of the print head to the right
to lock the print head.
6. Make sure the ink levers are raised, and then turn off the
printer.
7. Make sure the printer is turned off, and then unplug the
power cord.
8. Insert the protective materials and repack the printer. Contact
your dealer for assistance. See “Contacting Customer
Support” on page 355.
Over a short distance
If you need to move the printer over a short distance, be sure to
perform the following tasks.
❏ Raise the ink levers.
❏ Lift the printer, using at least two people. The printer weighs
approximately 50 kg (110.3 lb) and must be lifted carefully.
To Next Page
Loading...
