Printing with Mac OS 9.x 141
2
2
2
2
2
2
2
2
2
2
2
2
English
2. Click the Expansion button. The following dialog appears.
3. Choose Auto Expand or Retain Size from the pull-down
menu.
Auto Expand Select this setting if you want to enlarge the size of
print data automatically and print with no margins.
You can choose the amount of enlargement by
moving the slider.
Note:
Enlarged areas that exceed the paper size will not
be printed on the paper.
Retain Size Select this setting if you do not want to change the
ratio of your print data.
If you select this setting, you need to enlarge your
image data to exceed the paper width, to avoid
unprinted areas appearing along the left and right
edges. Enlarging 3 mm in both the left and right
directions is recommended, using the application
that created the data.
To use this feature, see “Making the Paper Sizes
setting” on page 138.
To Next Page
Loading...
