Paper Handling 283
6
6
6
6
6
6
6
6
6
6
6
6
English
Note:
Before printing on cut-sheet media, make sure paper in the paper tray is
not curled. If it is curled, uncurl it; otherwise, a paper jam may occur.
Now, the printer is ready to print. While the printer is printing,
do not open the top cover. If the top cover is opened while printing
is in progress, the printer stops printing, and then restarts printing
when the top cover is closed. Stopping and restarting printing
may reduce the print quality.
Loading paper smaller than A3 in the paper tray
1. Make sure the printer is on and in the READY state.
2. Press the Paper Source button to select Sheet .
3. Lift up the paper tray cover, and then pull the paper guide
roller.
To Next Page
Loading...
