Epson Stylus Pro 7600 - Choosing Paper and Layout Options

4-6
4-6 | Printing with EPSON Drivers for Windows
Choosing Paper and Layout Options
Many paper options correspond to paper handling features that you can also
set through the control panel. Software options give you additional settings
and override control panel settings. Follow these steps to choose paper and
layout options:
1. On the Properties dialog box, click the
Paper
tab. You see this window:
2. Select the type of paper you loaded (
Roll Paper
or
Sheet
) from the
Paper Source
list. If your image is more than 90.5 inches long, select
Roll Paper (Banner)
. This option is not available with all applications,
and can’t be used when printing with Photographic Dye ink at
2880 dpi.
3. Select the
Paper Size
you want, based on the size of your image. If your
size is not listed, select
User Defined
. Then enter the size in hundredths
of an inch (or centimeters).
Note
Many application settings
override settings in the
printer driver. Always
verify settings to get the
results you expect.
TIP
Creating a user-defined
paper size generally lets
you make the best use of
your roll paper.
Printer Guide.book Page 6 Monday, April 22, 2002 3:02 PM