Epson Stylus Pro 7600 - 1 Setting up the Printer

1-1
Setting Up the Printer | 1-1
Follow the steps in this chapter to assemble the printer, install the software,
and make any necessary adjustments. You should allow at least two hours for
this process.
This chapter covers the following information:
•
Unpacking and assembly
•
Connecting the power cord
•
Installing the ink cartridges
•
Loading the roll paper
•
Connecting the printer to your computer
•
Installing the printer software
•
Running a nozzle check
•
Aligning the print head
Chapter 1:
Setting Up
the Printer
Note
When choosing a place
for the printer, leave
adequate room for easy
access and ventilation.
Avoid locations subject to
direct sunlight, excessive
heat, moisture, or dust.
Also avoid locations near
potential sources of
interference, such as loud
speakers, cordless
phones, TVs, or air
conditioners.
Printer Guide.book Page 1 Monday, April 22, 2002 3:02 PM