2-21
Handling Paper and Other Media | 2-21
2. Slide the upper metal rods all the way in. Then fully extend the lower
rods, so that they rest on the floor.
3. Make sure the surface of the basket is taut. If there is any slack, the paper
may not slide properly to the floor.
Catching Printouts Under the Printer
To catch printouts under the printer, extend the upper metal rods all the
way out. Then push the lower rods all the way in.
Printer Guide.book Page 21 Monday, April 22, 2002 3:02 PM
To Next Page
Loading...
