2-13
Handling Paper and Other Media | 2-13
Switching Between 2-Inch and 3-Inch Roll Paper
You can convert the spindle to accept roll paper with either a 2-inch or
3-inch core. When the blue adapters are attached at each end, you can use
3-inch rolls. Follow these steps to remove the blue adapters for using 2-inch
roll paper:
1. Remove the black paper stop from the end of the spindle.
2. Press toward the center on the four tabs shown below to release the blue
adapter from the paper stop.
3. Remove the blue adapter from the white paper stop at the other end of
the spindle.
If you need to re-attach the blue adapters to use 3-inch roll paper, align the
arrow marks shown below and press the adapters on until they lock in place.
press tabs to release
Printer Guide.book Page 13 Monday, April 22, 2002 3:02 PM
To Next Page
Loading...
