2-18
2-18 | Handling Paper and Other Media
6. Feed the posterboard into the paper slot until it meets resistance.
7. Align the board with the scale on the roll paper cover.
8. Pull the paper lever forward, to the secured position. Then close the
front cover.
9. Press the
Pause
button (or wait for 5 seconds). The board feeds into
printing position automatically and
READY
appears on the control
panel.
Note
If you’re using stock
more than 39 inches
long, load it long edge
first (in landscape
orientation).
Printer Guide.book Page 18 Monday, April 22, 2002 3:02 PM
To Next Page
Loading...
