Epson Stylus Pro 7890 - Page 50

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
Paper Handling
50
D
Remove the take-up reel core from the
flange knob on the movable unit and the
drive unit.
Using the core from a used paper
roll as a take-up reel core
You can use a used paper roll as the take-up reel
core.
The installation of the flange to the Auto Take-up
Reel Unit varies depend on the core size of the
paper.
A
Remove the flange by pinching the knob.
B
Reverse the flange so that the smaller knob
is positioned on the outside, then replace it
on the drive unit by pinching the knob.
c
Caution:
The paper roll is heavy so have two people
hold it by both ends of the paper roll.
Note:
If the paper roll core is deformed or damaged, it
cannot be used as a take-up reel core.