Epson Stylus Pro 7890 - Page 91

Epson Stylus Pro 9890/9908/7890/7908 User’s Guide
Problem Solver
91
Error messages related to the printer
Error messages Description What to do
FRONT COVER OPEN
CLOSE FRONT COVER
The front cover is open. Close the front cover.
INK COVER OPEN
CLOSE RIGHT AND LEFT INK
COVERS
The ink cover(s) is
open.
Close the ink cover(s).
INK COVER OPEN
CLOSE RIGHT INK COVER
INK COVER OPEN
CLOSE LEFT INK COVER
CANNOT OPEN INK COVER
IS ANYTHING OBSTRUCTING
THE RIGHT INK COVER?
PRESS INK COVER OPEN
BUTTON
The ink cover(s)
cannot be opened.
Remove any object if it is obstructing the ink
cover(s). Then, press the button again.
CANNOT OPEN INK COVER
IS ANYTHING OBSTRUCTING
THE LEFT INK COVER?
PRESS INK COVER OPEN
BUTTON
F/W INSTALL ERROR
UPDATE FAILED
RESTART THE PRINTER
The printer fails to
update the firmware.
Turn the printer off, and then restart the printer.
Then, update the firmware using EPSON LFP
Remote Panel 2 again.
PRINTER ERROR
RESTART THE PRINTER
The printer needs to be
restarted while
recovering the error.
Turn the printer off, and after a while turn it on
again.
COMMAND ERROR
CHECK DRIVER SETTINGS
The printer receives
data that is
unsupported by the
printer.
Stop printing, and press the button to
cancel the job and reset the printer.
The printer receives
data with a wrong
command.
The installed printer
driver is not correct for
the printer.
Stop printing, and press the button to
cancel the job and reset the printer. Then make
sure that the installed printer driver is correct for
the printer.