Cleaning the platen and borderless printing pads | 27
Cleaning the platen and borderless printing pads
If the back of your prints are dirty, you can clean the platen and the borderless printing pads.
1. Turn off the printer, unplug it from the wall outlet, and wait one minute.
2. Open the front cover.
3. Wipe off any dust or dirt from the areas shown in gray. Wipe the platen from top to bottom, avoiding
the borderless pads.
If you are using a damp cloth with water mixed with a neutral detergent, make sure you wring out any
excess moisture before wiping. When you are finished, use a soft, dry cloth to wipe off any remaining
moisture.
To Next Page
Loading...
