Epson SureColor P-Series User Manual

Assembling the stand | 5
Assembling the stand
Note: You should use two people to assemble the stand.
1.
Insert the strut into the sides of the stand (labeled L and R) and fasten it with three bolts on each side.
Use the hex wrench to tighten the bolts.
Note: Make sure you tighten all bolts before moving to the next step.
2.
Move the stand in front of the printer and lock the front casters in place.

Epson SureColor P-Series Specifications

General

Brand	Epson
Model	SureColor P-Series
Category	Printer
Language	English