Troubleshooting
117
7301 A mechanical error occurred.
Check if there is any paper remaining inside the printer, and
then click [OK].
If the error continues to occur, a malfunction may have
occurred. Contact a technical representative.
Check if there is any paper remaining
inside the printer, and then click OK.
Contact a technical representative if
the error continues to occur.
6107
6109 to 6110
Parts have reached the end of their service life. (xxxx)
Contact a technical representative.
Contact a technical representative
and request replacement for the parts
displayed in (xxxx).
5001 The printer is disconnected.
Check the cable connection, and then turn the printer back on.
If the error continues to occur, contact a technical
representative.
Check the cable connection, and then
turn the printer back on.
U “Starting up and Shutting down
the Printer” on page 20
If the error is not cleared, contact a
technical representative.
5002 A network communication error occurred.
Check the LAN cable connection.
If the error continues to occur, contact a technical
representative.
7501 A printer system error occurred.
Turn off the printer, and then perform a Pre-operation Check.
If the error continues to occur, a malfunction may have
occurred. Contact a technical representative.
Turn off the printer, and then perform
a Pre-operation Check.
U “Starting up and Shutting down
the Printer” on page 20
If the error continues to occur, a
malfunction may have occurred.
Contact a technical representative.
Error ID Message What to do
To Next Page
Loading...
Need help?
General