Adjusting the Humidity in the Roll Paper Feeder
74
Adjusting the Humidity in the Roll Paper
Feeder
To maintain an appropriate humidity in the roll paper feeder, the humidity control unit can humidify or dehumidify
the roll paper feeder.
Each roll paper feeder has a humidity control unit. Adjust the humidity control unit for the paper in the roll paper
feeder for which you want to adjust the humidity. You can switch between dehumidification and humidification by
changing the way in which the humidity control unit is installed.
Tip:
The following shows the dehumidification and humidification standards.
O When humidity is at 60 to 80%: We recommend dehumidification.
O When humidity is at 30 to 60%: You do not need to perform dehumidification or humidification.
O When humidity is at 20 to 30%: We recommend humidification.
O Only the Dual Roll Model supports front roll paper. For the Single Roll Model, see the information for rear roll paper.
When dehumidifying, install so that the white surface
faces out.
When humidifying, install so that the black surface faces out.
To Next Page
Loading...
Need help?
General