Setup and Maintenance
89
Nozzle Check
This function allows you to check for clogged nozzles in the Print Head Unit. The printer automatically detects
clogging and displays the information on the screen. You can also print a check pattern for confirmation.
After performing a nozzle check, specify the type on the screen to perform head cleaning if necessary.
A
Click Settings/Maintenance on the SL-D3000 Maintenance Utility screen.
B
From the CR Unit Adjustment/Maintenance (03) menu, click Nozzle Check (0312) from Head Cleaning
(031).
Tip:
The Settings/Maintenance screen opens when you click Settings/Maintenance on the Printer Information screen.
To Next Page
Loading...
