Introduction
17
Flashing: If the light is flashing, a paper jam has occurred in the roll paper feeder.
Off: The printer is off, or no paper errors have occurred.
E Paper type setting switch
Press to change the paper type. The paper type changes each time the button is pressed, and the current paper type is
indicated by the lights. Match the paper type to the type of paper loaded.
The switch is enabled when the roll paper feeder cover is open, and paper is removed.
You cannot change to paper for Option 1, 2, or 3.
F Paper type light (green)
The paper type setting is indicated by a lit or flashing light.
On: Indicates the paper type setting.
Flashing: The paper type can be changed.
Off: The power is off, or the paper type cannot be set in the current status.
D Paper status light (orange)
To Next Page
Loading...
Need help?
General