A-6 Product Specifications of the TM-C100 Rev. C
A.3.1.2 Plain borderless label paper
Print area and cutter position (borderless label sheets)
Note:
Borderless label paper must have scraps on both sides (a portion of installing only).
Do not print on the scrap parts (the portion of installing only).
The values given are typical values. Since there is variation in the slack and thickness of the paper, take
this into account when setting the postion of the cutter and the printing position.
2
hand fed
paper
2
[Unit: mm]
paper width 45 mm to 105
0.42
overall size
print area
2
roll paper guide
autocut
position
autocut
position
2
15 mm or more
when auto-cutting
1 (scrap)1 (scrap)
feed direction
To Next Page
Loading...
Need help?
General