Rev. C Setup 2-11
TM-C100 Technical Reference Guide
2.3.4 Connecting the printer to the host PC / POS terminal
Note:
To connect the printer to your computer you need a USB interface cable. The printer does not come with a
cable. Please provide this yourself.
1. If the printer is turned on, turn it off with the POWER switch.
2. Attach the provided cable hook to the back of the printer.
3. Hook the USB cable through the cable hook, as shown in the figure below.
Note:
Hooking the USB cable through the cable hook, as shown in the figure above, will prevent the cable
from coming unplugged.
4. Connect the host computer and printer with the USB cable to complete the connection.
cable hook
To Next Page
Loading...
Need help?
General