Rev. C Setup 2-5
TM-C100 Technical Reference Guide
2.2 Setup Procedure
To get the best performance from your printer, it is necessary to make various settings before
you use it. Set up the printer as required.
The procedure for preparing the printer for use is as follows.
3. Setup is complete
2. Driver settings
❏ Install the driver
❏ Set the port
❏ Set the options to use
❏ Set the paper (paper type, size, mode and so on)
❏ Set the autocutter action
1. Printer setup
(See "Printer Setup" on page 2-6.)
❏ Install the options
• Roll paper unit, paper tray, roll paper
• ASF unit, paper tray, standard size paper
❏ Connect the printer to the power supply
❏ Install the ink cartridge
To Next Page
Loading...
Need help?
General