Epson TM-H6000III Development Guide

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
CheckScanner
41
• Please note that the setting value of the RemainingImagesEstimate
property may drastically change at the execution of the storeImage method
when the size of "the image to store" is quite different from the size of "the
last stored image" since the value set to the RemainingImagesEstimate
property is based on "the last stored image".
z The following are precautions about the CHK_DI_EXTEND_TMSTORE
command.
• Capacity of the device’s Storage Memory is 16 MB.
• Bi-tonal JPEG image data cannot be stored to the device.
When bi-tonal JPEG is specified as the format, replace it with TIFF then
store the data.
• Size auto-adjustment is not executed.
• The contrast of an image cannot be adjusted when it is being stored onto
the device.
• When the EndInsertion method is executed under the condition of
CHK_DI_EXTEND_TMSTORE is set, no data is stored to the working
buffer memory area. Therefore, the values of the DocumentWidth
property and the DocumentHeight property that indicate information size
are not updated.
• It is not supported to retrieve stored image data from the Storage Memory
of the device. The program specified for reading from Storage Memory of
the device should be used for reading the stored image.
Please refer to
"EPSON OPOS ADK MANUAL TM Storage OCX MANUAL TM Storage
OCX" for details. The file name of this manual is "TMStorage.pdf". It is
placed in the "Manual" folder in the directory where OPOS is installed.
• When the EndInsertion method is executed under the condition of
CHK_DI_EXTEND_TMSTORE is set, the CHK_DI_SIZE_OFFSET
command and the CHK_DI_ROTATEIMAGE command settings become
invalid.
z The following are precautions about the CHK_DI_CHANGE_MODE
command.
• For executing card reading, switching the reading mode to card scanner
mode by executing the CHK_DI_CHANGE_MODE command of DirectIO is

Epson TM-H6000III Specifications

General

Dimensions (WxDxH)	186 x 298 x 185 mm
USB port	Yes
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Connectivity technology	Wired
Type	POS printer
Print speed	63 lps
Character size	0.99 x 2.4 mm
Print technology	Dot matrix
Safety	UL, CSA, TÜV
Certification	VCC1, FCC, CE
Country of origin	China
Autocutter durability	1.5 million cuts
Mean time between failures (MTBF)	360000 h
Product color	Black
Maximum roll diameter	83 mm
Supported paper width	80 mm
Printing media thickness	60 - 90 µm
Ethernet LAN	No
Input current	1.8 A
Power supply type	DC
Pallet width	800 mm
Pallet height	1675 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pallet	40 pc(s)
Quantity per pallet (UK)	50 pc(s)
Quantity per pallet layer	8 pc(s)
Quantity per pallet layer (UK)	10 pc(s)
Package depth	382 mm
Package width	285 mm
Package height	305 mm
Package weight	6600 g
Quantity per pack	1 pc(s)