Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
CheckScanner
42
necessary. After the mode switching, card can be read with the same
procedure as the check.
• BeginInsertion, EndInsertion and CheckHealth methods are transacted
corresponding to specified reading mode at the method execution.
BeginRemoval and EndRemoval methods are transacted regardless of
reading mode.
• Slip operations for POSPrinter and MICR are practicable, even with card
scanner mode.
While a slip is being inserted, or the slip station is in operation, card
transactions are impracticable. While a card is being inserted, or the card
station is in operation, slip transactions are impracticable.
• Please note that the Storage Memory of device does not distinguish check
read image and card read image since the Storage Memory of device uses
the same memory area regardless of reading mode.
z The following are precautions about the CHK_DI_SHARPNESS_IMAGE
command.
• The settings of the CHK_DI_PRESCAN command and the
CHK_DI_BORDER_COLOR command are reflected when the setting of
the CHK_DI_SHARPNESS_IMAGE command is
CHK_DI_SHARPNESS_OFF at the execution of EndInsertion method.
• The settings of the CHK_DI_PRESCAN command and the
CHK_DI_BORDER_COLOR command are not reflected when the setting
of the CHK_DI_SHARPNESS_IMAGE command is
CHK_DI_SHARPNESS_ON at the execution of EndInsertion method.
z The error code differs by that timing when the power is turned OFF.
To Previous Page
Loading...
