5
Cautions
Restriction of Use
When this product is used for applications requiring high reliability/safety, such as
transportation devices related to aviation, rail, marine, automotive, etc.; disaster prevention
devices; various safety devices; or functional/precision devi
ces, you should use this product
only after giving consideration to including fail-safes and redundancies into your design to
maintain safety and total system reliability. Be c ause this product was not intended for use in
applications requiring extremely high reliability/safety, s uch as aerospace equipment, main
communication equipment, nuclear power control equipment, or medical equipment related to
direct medical care, etc., please make your own judgement on this product's suitability after a
full evalu
ation.
Use of the TM-L500A RFID in other countries/areas than specified is strictly prohibited. For the
information on the countries/areas where you can use the TM-L500A RFID, see the information
sheet included with your model.
CAUTION
Do not connect cables in ways other than those mentioned in this manual.
Different connections may cause equipment damage or fire.
Be sure to set this equipment on a firm, stable, horizontal surface.
The product may break or cause injury if it falls.
Do not use this product in locations subject to high humidity or dust levels.
Excessive humidity and dust may cause equipment damage or fire.
Do not place heavy objects on top of this product. Never stand or lean on this
product.
Equipment may fall or collapse, causing breakage and possible injury.
Take care not to injure your fingers on the manual cutter:
When you remove printed paper.
When you perform other operations, such as loading/replacing roll paper.
Do not open the roll paper cover without taking the necessary precautions, as this
can result in injury from the autocutter fixed blade.
To ensure safety, unplug this product before leaving it unused for an extended
period.
To Next Page
Loading...
Need help?
General
