54
Installing and Replacing Paper
Installing Paper
When the Paper LED is on, follow the steps below to load paper.
1
Turn on the printer.
2
Open the paper loading cover by pulling up the cover open lever.
WARNING
Do not open the covers during printing/autocutting.
The printer may be damaged.
Do not touch the manual cutter with your hands.
Otherwise, you may be injured because the manual cutter blade is sharp.
Use paper that meets the printer specifications. For details about paper specifications,
see "Paper Specifications" on page 25.
When changing the paper width, you need to remove or move the paper guide and to
change the setting for the paper width with the customized value. To change the paper
width, see "Setting the DIP Switches" on page 36.
To adjust the cutting position, define a character string in the CUTPOS field in the printer
environment data for baggage tags. (The adjustable range: -30 to 30)
To Next Page
Loading...
