Chapter 4 Handling
55
4
3
Insert the end of the paper under the rollers.
The paper is fed automatically.
4
Close the paper loading cover.
The paper is fed to the position of a punch hole or a black mark, and cut automatically.
Replacing Paper
Follow the steps below to replace paper.
1
Turn on the printer.
2
Hold down the Unload () button until the paper starts feeding back-
ward.
3
After paper feeding stops, remove the paper by pulling it backward.
4
Open the paper loading cover by pulling up the cover open lever.
Close the paper loading cover immediately. If it is left open for 1 minute or longer, paper
feeding may not be correct.
To Next Page
Loading...
