Epson TM-L500A RFID - Setting Menu on the LCD

50
Setting Menu on the LCD
You can set the buzzer volume, LCD contrast, LCD brightness, and clock time with the buttons
on the control panel.
•Buzzer volume: The buzzer sounds when the printer is in an error status.
You can adjust the volume of the buzzer from OFF to level 5.
•LCD contrast:You can adjust t
he contrast of the LCD from level 1 to 3.
•LCD brightness: You can select the brightness of the LCD from Bright/Dim/Off.
•Clock time: You can set year, month, date, hour, and minute.
Follow the steps below to set menu on the LCD.
1
Turn on the printer.
2
When “On Line” is displayed on the LCD, press the ON/Off Line (Back)
button to put the printer offline.
3
Press the Menu (OK) button to display “[Setting menu]” on the LCD.
4
Use the Unload () button and Feed () button to display the setting
item for which you want to make a setting, and press the Menu (OK)
button to select it.
5
Use the Unload () button and Feed () button to display the setting
options, and press the Menu (OK) button to set it.
6
To make another setting, press the On/Off Line (Back) button once to
return to the menu selecting screen.
To finish setting, press the On/Off Line (Back) button twice to exit the menu mode.
 The buzzer volume, LCD contrast, LCD brightness, and clock time can be set also with
the customized value. To set the customized value, see "Setting the Memory Switches"
on page 45.
 When resetting the RTC, moves automatically to the panel operation display for inputting
year, month, day, and time after starting up.
 When the RTC has been reset, RFID cannot be used.