Chapter 1 Product Overview
27
1
Printable Area
Printing and Cutting Positions
The values above may vary slightly as a result of paper slack or variations in the paper.
Take this into account when setting the cutting position of the autocutter.
54.0 mm {2.13"} ± 0.5 mm
50.8 mm {2.00
"} (407 dots)1.5 mm {0.059"}
1.7 mm {0.067
"}
Dot no.3
Dot no.409
Autocutter blade position
Approx. 31 mm
Approx.
16 mm
Manual-cutter position
Center of the print dotline
Paper feed direction
The numeric values are typical values.
To Next Page
Loading...
