Chapter 4 Handling
53
4
Handling
This chapter describes basic handling of the printer.
Usage Precautions
•This printer is dedicated for RFID tag printing. The paper guide is fixed to the RF tag width,
and the paper width is unchangeable.
•Do not place other tags next to the printer, or the printer may write data on the tag outside.
•Install the printer horizontally.
•When installing, leave enough space around the printer for loading paper, turning on/off the
power switch, removing jammed paper, and so on.
•Make sure cords and foreign objects are not caught in the printer.
•Do not open the covers during printing or autocutting.
•Make sure that the printer is not su
bjected to any impact or vibration.
•Do not put any food or drink on the printer case.
•Do not move the printer with the paper loading cover open. The cover may close
unexpectedly.
•To prevent a paper jam, do not prevent paper from being ejected from the paper exit and do
not pull the paper being ejected.
To Next Page
Loading...
