Chapter 2 Setup
49
2
AEA error judgement for wrong coupon type
•AEA error
• No AEA error (initial setting)
Font compatible mode
• PECTAB-compliant font
• IER506-compatible font (initial setting)
Truncate function
•Does not truncate
•Truncates (no error) (initial setting)
•Truncates (error)
Transmission conditions for serial interface
Transmission speed
When DIP switches 3 and 4 are set to ON, the value (initially 19200 bps) can be set to 2400, 4800,
9600, 19200, 38400, 57600, or 115200 bps. (See "Transmission Speed (DIP Switches 3/4)" on page
38.)
Parity bit
•None (initial setting)
•Odd
•Even
Flow control
•RTS/CTS control (initial setting)
•DTR/DSR control
The transmission speed can be set with DIP switches 3 and 4 (See "Transmission Speed
(DIP Switches 3/4)" on page 38.) or the memory switch. When DIP switches 3 and 4 are set
to ON, the setting with the memory switch is enabled.
To Next Page
Loading...
