Version 3.00 Feb. 2019
7
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-L90)
2.4.2 Paper Width Setting
The TM-L90 models support the following paper width. After adding the TM-L90
by the SetupPOS utility, open
the “Device Specific Settings” dialog box. In the
“Paper” tab the paper width could be selected.
The settable paper widths are as follows:
z From 38 to 80 [mm]
The default paper width is set to 80mm.
To Next Page
Loading...
Need help?
General
